Rice Lake MSI-8000 RF Remote Display - ScaleCore Configuration Management Program (ScCMP) - Manual (Page 35)

Advanced Configuration 31
6.9 Bargraph/Features
The advanced view allows editing of ScaleCore bargraph and features. The bargraph is an internally calculated
function that can be configured to a specific resolution, minimum, and maximum value. The features include
function key assignments, auto power off, and LED sleep/intensity settings (may not be supported by all products).
Figure 6-10. Configuration View - Bargraph/Features
6.9.1 Parameters
Table 6-9. Bargraph Parameters
Parameter Description
Bargraph
Sensor ID Sensor ID. Range 0 to 16.
Value Type Sensor value type.
Unit Sensor value unit.
Maximum Segments Maximum number of segment in a bar graph.
First Segment Minimum sensor value in order to light up the 1st segment.
Last Segment Maximum sensor value to light up the last segment.
Features
Function Key 1 Programmable F1 key function.
Function Key 2 Programmable F2 key function.
Power Off Mode Automatic power off mode.
LED Sleep Mode Adjusting this setting can help with battery life.
LED Intensity Brightness setting. Adjusting this setting can help with battery life.
6.9.2 Controls
Edit Bargraph – The edit bargraph dialog allows complete configuration of the bargraph parameters. The
bargraph can be customized for the range, and resolution displayed. The bargraph can be configured to any load
cell or math sensor for value input.
Edit Features – The edit features dialog allows complete configuration of the features settings. Function keys,
power off mode and LED settings are dependent on the capabilities of the ScaleCore device. Reference the specific
device User Guide for more details.