Rice Lake MSI-8000 RF Remote Display - ScaleCore Configuration Management Program (ScCMP) - Manual (Page 12)

8 ScCMP Operator’s Manual
3.2.2 Temperature
A ScaleCore device will typically have a temperature sensor. The measured temperature is displayed on this
interface.
Figure 3-4. Data View – Temperature
Note The temperature data will not be updated if the monitor is not enabled from the Edit menu.
Parameter Description
Sensor ID Typically 8 for temperature sensors.
Status Current status of the sensor.
Value The measured temperature value.
Units The current units of measure for temperature.
Table 3-2. Temperature Parameters