Rice Lake MSI-8000 RF Remote Display - ScaleCore Configuration Management Program (ScCMP) - Manual (Page 32)

28 ScCMP Operator’s Manual
6.7 Setpoints
The advanced view allows editing of ScaleCore setpoints feature. Setpoints provide a trip point for load values.
Figure 6-8. Configuration View - Setpoints
6.7.1 Parameters
Table 6-7. Setpoint Parameters
Parameter Description
Number Setpoint number range 0 to 2.
Sensor Sensor ID. Range 0 to 16.
Enabled Enable or Disable the setpoint.
Cmp Logic Comparison logic and its value mode flags. 2=='<', 1=='>'
Value Mode 0 == net_gross, 1== gross, 2==total.
Hysteresis Setpoint hysteresis in countby.
Value Comparison value. Its unit is assumed to be same as unit of viewing countby.
6.7.2 Controls
Edit Setpoint – The edit setpoint dialog allows complete configuration of the setpoint parameters.