beautypg.com

Opening/closing, Side windows – Mercedes-Benz CL-Class 2013 Owners Manual User Manual

Page 91

background image

Using KEYLESS-GO

The KEYLESS-GO key must be outside the

vehicle. All the doors must be closed.

X

Touch recessed sensor surface : on the

door handle until the side windows and the

sliding sunroof are fully closed.

i

Make sure you only touch recessed

sensor surface :.

X

Make sure that all the side windows and the

sliding sunroof are closed.

X

To interrupt convenience closing:

release recessed sensor surface : on the

door handle.

Resetting the side windows

You must reset each side window if:

R

a front side window cannot be closed

automatically

R

a side window opens again slightly after

being closed manually

X

Close all the doors.

X

Turn the SmartKey to position 1 or 2 in the

ignition lock.

X

Pull the corresponding switch on the door

control panel until the side window is

completely closed. (

Y

page 87)

X

Hold the switch for an additional second.

If the side window opens again slightly:

X

Immediately pull the corresponding switch

on the door control panel until the side

window is completely closed (

Y

page 87).

X

Hold the switch for an additional second.

X

If the corresponding side window remains

closed after the button has been released,

the side window has been reset correctly.

If this is not the case, repeat the steps

above again.

Problems with the side windows

Problem: a side window cannot be closed

because it is blocked by objects, e.g.

leaves in the window guide.

X

Remove the objects.

X

Close the side window.

Problem: a side window cannot be closed

and you cannot see the cause.

G

WARNING

Closing the side windows with increased force

or without the anti-entrapment feature could

lead to serious or even fatal injury. Make sure

that nobody can become trapped when

closing the side windows.

If a side window is obstructed during closing

and reopens again slightly:

X

Immediately after the window blocks, pull

the corresponding switch again until the

side window has closed.

The side window is closed with increased

force.

If a side window is obstructed again during

closing and reopens again slightly:

X

Immediately after the window blocks, pull

the corresponding switch again until the

side window has closed.

The side window is closed without the anti-

entrapment feature.

Side windows

89

Opening/closing

Z