Comand, Audio – Mercedes-Benz CL-Class 2013 Owners Manual User Manual
Page 207
Selecting a category
X
To call up the category list: select
Category
by turning cVd the COMAND
controller and press W to confirm.
The category list appears.
X
To select a category: select a category by
turning cVd the COMAND controller and
pressing W to confirm.
The category selected is shown in the
display. You hear the station last selected
for this category.
The
All Channels
category is at the top
of the category list. This category is sorted
by channel number and allows you to
browse all available channels.
Selecting a channel
Channel search
X
Turn cVd or slide XVY the COMAND
controller while the display/selection
window in the SatRadio display is active.
COMAND searches in both directions
(ascending and descending) and stops at
the next channel found in the selected
category.
Using the multifunction steering wheel
X
Press = or ; to select the
Audio
menu.
X
Press and hold 9 or :.
SatRadio menu
X
Select
Sat. Radio
in the submenu bar by
turning cVd the COMAND controller and
press W to confirm.
The SatRadio menu appears.
Entering channel numbers directly
Option 1
X
Press the Ä button.
An input menu appears.
Option 2
X
Select
Sat. Radio
in the submenu bar by
turning cVd the COMAND controller and
press W to confirm.
X
Select
Enter Channel
and press W to
confirm.
An input menu appears.
X
To enter a channel: irrespective of the
option, press the corresponding number
keys on the control panel one after the
other.
COMAND sets the selected channel.
i
You can only select currently permitted
digits.
Selecting a channel from the SatRadio
channel list
X
Select
Sat. Radio
in the submenu bar by
turning cVd the COMAND controller and
press W to confirm.
X
Select
Channel List
and press W to
confirm.
The channel list appears.
X
Select a channel by turning cVd the
COMAND controller and press W to
confirm.
Memory functions
Storing channels
i
There are ten presets available.
X
Press W the COMAND controller when the
display/selection window is active.
or
X
Select
Presets
in the submenu bar by
turning cVd the COMAND controller and
press W to confirm.
In both cases, the channel presets appear.
The R dot in front of a preset position
indicates that the currently selected
channel is stored there.
Audio
205
COMAND
Z