beautypg.com

Lights and windshield wipers, Exterior lighting – Mercedes-Benz CL-Class 2013 Owners Manual User Manual

Page 251

background image

X

Turn the light switch to $ or c.

or

X

If the rear fog lamp is switched on: press

the light switch in to the stop.

Low-beam headlamps

X

To switch on the low-beam headlamps:

turn the SmartKey in the ignition lock to

position 2 or start the engine.

X

Turn the light switch to L.

The T indicator lamp on the light switch

lights up.

X

To switch off the low-beam

headlamps: turn the light switch to $.

Daytime running lamps

Daytime running lamps in Canada
The daytime running lamps function is

required by law in Canada. It cannot therefore

be deactivated.

X

Turn the light switch to $ or c.

With the engine running: depending on the

ambient light, the daytime running lamps or

the low-beam headlamps are switched on.
When the low-beam headlamps are

switched on, the T indicator lamp on

the light switch lights up.

When the engine is running and the vehicle is

stationary or if the electronic parking brake is

applied: if you move the selector lever from a

drive position to P, the daytime running

lamps/low-beam headlamps go out after

three minutes.
When the engine is running, the vehicle is

stationary and in high ambient light

brightness: if you turn the light switch

to T, you turn on the daytime running

lamps and parking lamps.
If the engine is running and you turn the light

switch to L, the manual settings take

precedence over the daytime running lamps.

Daytime running lamps in the USA
In the USA, the daytime running lamps are

deactivated upon delivery from the factory.

X

To activate the daytime running

lamps: activate the daytime running lamps

function in the on-board computer

(

Y

page 347).

X

Turn the light switch to $ or c.

With the engine running: depending on the

ambient light, the daytime running lamps or

the low-beam headlamps are switched on.
When the low-beam headlamps are

switched on, the T indicator lamp on

the light switch lights up.

If the engine is running and you turn the light

switch to T or L, the manual settings

take precedence over the daytime running

lamps.

Automatic headlamp mode

X

To switch on automatic headlamp

mode: turn the light switch to c.

SmartKey in position 1 in the ignition lock:

the parking lamps are switched on or off

automatically depending on the brightness

of the ambient light.
With the engine running: depending on the

brightness of the ambient light, the daytime

running lamps

10

or the parking lamps and

low-beam headlamps are switched on or off

automatically.
When the low-beam headlamps are

switched on, the T indicator lamp on

the light switch lights up.

G

WARNING

If the light switch is set to c, the low-beam
headlamps will not come on automatically if

it is foggy. This could endanger you and

others. Therefore, turn the light switch to

L in fog.

10

Only if daytime running lamps have been activated via the on-board computer.

Exterior lighting

249

Lights

and

windshield

wipers

Z