Comand, Vehicle – Mercedes-Benz CL-Class 2013 Owners Manual User Manual
Page 241
Setting the airflow
You can set the airflow separately for the
driver’s and front-passenger side.
X
Select left airflow = or right airflow A by
turning cVd the COMAND controller and
press W to confirm.
X
To adjust the airflow: slide ZVÆ or turn
cVd the COMAND controller.
X
To confirm the selection: press W the
COMAND controller.
Climate control main menu
COMAND allows you to set additional
functions which cannot be selected using the
control panel in the center console. Call up
these functions using the climate control
main menu.
X
To open the climate control main
menu: select the AC climate control
symbol in the air-conditioning function bar
by turning cVd the COMAND controller
and press W to confirm.
The climate control menu opens.
Climate control main menu
You can:
R
switch cooling with dehumidification on or
off (Æ)
R
control climate control centrally (
Mono
)
R
adjust the
Footwell Temperature
R
set the
Airflow
for the air vents
Switching cooling with air
dehumidification on/off
Cooling is operational when the engine is
running, and cools according to the selected
interior temperature for the vehicle. Cooling
also dehumidifies the air inside the vehicle
and, thereby, prevents the windows from
fogging up.
G
WARNING
If you switch off cooling with
dehumidification, the vehicle will not be
cooled and the air not dehumidified in warm
weather conditions. The windows can mist up
faster. This could result in your no longer
being able to observe the traffic conditions
properly and you may cause an accident.
i
Condensation may collect on the
underside of the vehicle when the cooler is
operating.
X
Select the climate control main menu in the
air-conditioning function bar by turning
Vehicle
239
COMAND
Z