beautypg.com

Climate control, Operating the climate control systems – Mercedes-Benz CL-Class 2013 Owners Manual User Manual

Page 267

background image

Activating/deactivating air-

recirculation mode

You can deactivate the flow of fresh air if

unpleasant odors are entering the vehicle

from outside. The air already inside the

vehicle will then be recirculated.

G

WARNING

Fogged windows impair visibility,

endangering you and others. If the windows

begin to fog on the inside, switching off the

air recirculation mode immediately should

clear interior window fogging. If interior

window fogging persists, make sure the air

conditioning is activated, or press the ¬

button.

X

Turn the SmartKey to position 2 in the

ignition lock.

X

To activate: press the g rocker switch

up or down.

The indicator lamp in the g rocker

switch lights up.

i

Air-recirculation mode is activated

automatically at high outside

temperatures. The indicator lamp in the

g rocker switch is not lit when

automatic air-recirculation mode is

activated.
Outside air is added after about

30 minutes.

X

To deactivate: press the g rocker

switch up or down.

The indicator lamp in the g rocker

switch goes out.

i

Air-recirculation mode deactivates

automatically:

R

after approximately five minutes at

outside temperatures below

approximately 41 ‡ (5 †)

R

after approximately five minutes if

cooling with air dehumidification is

deactivated

R

after approximately 30 minutes at

outside temperatures above

approximately 41 ‡ (5 †)

Activating/deactivating the residual

heat function

It is possible to make use of the residual heat

of the engine to continue heating the

stationary vehicle for up to 30 minutes after

the engine has been switched off. The heating

time depends on the temperature that has

been set.

i

The blower will run at a low speed

regardless of the airflow setting.

i

If you activate the residual heat function

at high temperatures, only the ventilation

will be activated. The blower runs at

medium speed.

X

Turn the SmartKey to position 0 in the

ignition lock or remove it.

X

To activate: press the Ì rocker switch

up or down.

The indicator lamp in the Ì rocker

switch lights up.

X

To deactivate: press the Ì rocker

switch up or down.

The indicator lamp in the Ì rocker

switch goes out.

i

Residual heat is deactivated

automatically:

R

after about 30 minutes

R

when the ignition is switched on

R

if the battery voltage drops

R

if the coolant temperature is too low

Operating the climate control systems

265

Climate

control

Z