Mercedes-Benz CL-Class 2013 Owners Manual - Manual (Page 349)

X Press the = or ; button on the
steering wheel to select the DriveAssist
menu.
X Press 9 or : to select Blind Spot
Assist .
X Press the a button.
The current selection is displayed.
X To activate/deactivate: press the a
button again.
Activating/deactivating Active Lane
Keeping Assist
You can use the Lane Keeping Assist
function to activate or deactivate Active Lane
Keeping Assist (
Y
page 328).
X Press the = or ; button on the
steering wheel to select the DriveAssist
menu.
X Press 9 or : to select Lane
Keeping Assist .
X Press the a button.
The current selection is displayed.
X To activate/deactivate: press the a
button again.
When Active Lane Keeping Assist is activated,
the à symbol appears in the multifunction
display when the ignition is on.
Service menu
In the Service menu, you have the following
options:
R calling up display messages (
Y
page 350)
R checking the tire pressure electronically
(
Y
page 459)
R calling up a service due date
(
Y
page 424)
R checking the oil level (
Y
page 419)
Settings menu
Introduction
The Settings menu can be used for:
R Switching the daytime running lamps on/
off
R switching Adaptive Highbeam Assist on/
off
R showing or hiding the additional
speedometer
R selecting the units for speed and distance
R activating/deactivating the radar sensor
system
Switching the daytime running lamps
on/off
This function is not available in Canada.
If you have activated the
Daytime running
lights function and the light switch is in the
$ or c position, the daytime running
lamps are automatically switched on when
the engine is running.
Depending on the ambient light, the following
will additionally light up:
R parking lamps
R tail lamps
R license plate lamp
R side marker lamps
If you turn the light switch to a different
position, the corresponding lights are
switched on. If you switch off the daytime
running lamps at night, make sure that the
light switch is set to L or c.
The factory setting is
On .
X Press the = or ; button on the
steering wheel to select the Settings
menu.
X
Press the 9 or : button to select
daytime running lamps .
X Press the a button to confirm.
X
To activate/deactivate: press a
again.
Menus and submenus
347
On-board
computer
and
displays
Z