beautypg.com

Technical data, Service products and filling capacities – Mercedes-Benz CL-Class 2013 Owners Manual User Manual

Page 488

background image

R

if the vehicle is carrying a light load, e.g.

two passengers without luggage, do not

allow the engine to rev above 3000 rpm.

R

if the vehicle is fully loaded or is being

operated in mountainous terrain, do not

depress the accelerator pedal further

than Ô of the pedal travel.

Only refuel using premium-grade unleaded

gasoline with a minimum octane rating of 91.
Reformulated Gasoline (RFG) and/or

unleaded gasoline with additives can be used.

The concentration of additives in the fuel,

however, must not exceed 10 %, e.g.:

R

Ethanol

R

TAME

R

ETBE

R

IPA

R

TBA

For MTBE, the concentration should not

exceed 15 %.
The concentration of methanol in gasoline,

including other additives, must not exceed

3 %.
Using mixtures of methanol and ethanol is not

permitted. Gasohol, a mixture of 10 % ethanol

and 90 % unleaded gasoline, may be used.
All of these mix fuels must fulfill the fuel

requirements, e.g.:

R

knock resistance

R

boiling point

R

vapor pressure

You will usually find information about the fuel

grade on the pump. If you cannot find the

label on the pump, ask the staff for

assistance.

i

For further information, consult an

authorized Mercedes-Benz Center or on

the Internet at http://www.mbusa.com

(USA only).

Information on refueling (

Y

page 284).

Additives

!

Do not refuel with low-grade fuel and do

not use fuel additives that are not tested

and approved for Mercedes-Benz vehicles.

Damage to or malfunctions of the fuel

system may otherwise occur.

One of the main problems of poor fuel quality

is the forming of deposits that are created

during the gasoline combustion process.

Mercedes-Benz recommends that you use

branded fuels that have additives.
If you use fuels without these additives over

a longer period of time, carbon deposits may

build up. These deposits form at the inlet

valves and in the combustion chamber in

particular.
This could lead to engine problems, e.g.:

R

longer engine warm-up phase

R

uneven idle

R

engine noise

R

misfiring

R

loss of power

Carbon deposits may form if the availability

of gasoline with relevant additives is

insufficient (in certain regions). In this case,

Mercedes-Benz recommends additives

approved for use in Mercedes-Benz vehicles;

see http://bevo.mercedes-benz.com.
For a list of approved products, consult an

authorized Mercedes-Benz Center. Comply

with the instructions for use on the product

label.
Do not mix other fuel additives with fuel. This

causes unnecessary costs and could damage

the engine.

Engine oil

Points to note
!

Never use engine oil or an oil filter of a

specification other than is necessary to

fulfill the prescribed service intervals. Do

not change the engine oil or oil filter in

order to achieve longer replacement

486

Service products and filling capacities

Technical

data