Driving and parking, Driving systems – Mercedes-Benz CL-Class 2013 Owners Manual User Manual
Page 325

If you push the combination switch forward
beyond the point of resistance again, both
systems are reactivated.
X
To deactivate: press button : again.
X
Deactivate Adaptive Highbeam Assist
(
Y
page 252).
i
If you do not wish to use the spotlight
function, you first need to deactivate Night
View Assist Plus and then activate it again
without the spotlight function
(
Y
page 323).
Activating/deactivating Night View
Assist Plus without spotlight function
You can only activate Night View Assist Plus
without spotlight function if:
R
the SmartKey is in position 2 in the ignition
lock.
R
it is dark.
R
the light switch is in the c or L
position.
R
reverse gear has not been engaged.
X
To activate: press and hold button : until
the active spotlight function symbol goes
out in the Night View Assist Plus display in
the multifunction display.
If you drive faster than approximately
6 mph (10 km/h), the symbol for active
pedestrian recognition without spotlight
function appears instead.
:
Night View Assist Plus display
;
Pedestrian recognized
=
Framing
?
Symbol for active pedestrian recognition
without spotlight function
A
Speed display
You can find out more about adjusting the
brightness of the multifunction display in the
"COMAND" section (
Y
page 116).
i
The infrared lamps switch on
automatically from a speed of about
6 mph (10 km/h). This means that you do
not have the full visual range while the
vehicle is stationary and cant check
whether Night View Assist Plus is working.
When you activate Night View Assist Plus,
speed display A in the multifunction display
changes. Speed display A is shown as a bar
at the bottom edge of the multifunction
display. This line is no longer available for
basic menus. You have to deactivate Night
View Assist Plus if you want to change a
setting using the buttons on the multifunction
steering wheel.
X
To deactivate: press button : again.
i
If you want to use the spotlight function
as well, you first need to deactivate Night
View Assist Plus and then reactivate it with
the spotlight function (
Y
page 321).
Driving systems
323
Driving
and
parking
Z