beautypg.com

Maintenance and care, Engine compartment – Mercedes-Benz CL-Class 2013 Owners Manual User Manual

Page 425

background image

X

Park the vehicle on a level surface.
Only check the coolant level when the

vehicle is on a level surface and the engine

has cooled down.

X

Turn the SmartKey to position 2 in the

ignition lock (

Y

page 271).

On vehicles with KEYLESS-GO, press the

Start/Stop button twice (

Y

page 271).

X

Check the coolant temperature display in

the instrument cluster.

The coolant temperature must be below

158 ‡ (70 †).

X

Turn the SmartKey to position

0(

Y

page 271) in the ignition lock.

X

Slowly turn cap : half a turn counter-

clockwise to allow excess pressure to

escape.

X

Turn cap : further counter-clockwise and

remove it.

If the coolant is at the level of marker bar

= in the filler neck when cold, there is

enough coolant in coolant expansion

tank ;.
If the coolant level is approximately 0.6 in

(1.5 cm) above marker bar = in the filler

neck when warm, there is enough coolant

in coolant expansion tank ;.

X

If necessary, add coolant that has been

tested and approved by Mercedes-Benz.

X

Replace cap : and turn it clockwise as far

as it will go.

For further information on coolant, see

(

Y

page 488).

Adding washer fluid to the windshield

washer system/headlamp cleaning

system

G

WARNING

Washer solvent/antifreeze is highly

flammable. Do not spill washer solvent/

antifreeze on hot engine parts, because it may

ignite and burn. You could be seriously

burned.

X

To open: pull cap : upwards by the tab.

X

Add the premixed washer fluid.

X

To close: press cap : onto the filler neck

until it engages.

The washer fluid reservoir is used for both the

windshield washer system and the headlamp

cleaning system.
Further information on windshield washer

fluid/antifreeze (

Y

page 489).

Brake fluid level
!

If the brake fluid level in the brake fluid

reservoir has fallen to the MIN mark or

below, check the brake system

immediately for leaks. Also check the

thickness of the brake linings. Visit a

qualified specialist workshop immediately.
Do not add brake fluid. This does not

correct the malfunction.

Only check the brake fluid level when the

vehicle is stationary and on a level surface.

Engine compartment

423

Maintenance

and

care

Z