beautypg.com

Safety, Occupant safety – Mercedes-Benz CL-Class 2013 Owners Manual User Manual

Page 60

background image

X

Adjust the seat and move the backrest to

an almost vertical position (

Y

page 94).

X

Pull the seat belt smoothly through belt

sash guide :.

X

Without twisting it, guide the shoulder

section of the seat belt across the middle

of your shoulder and the lap section across

your hips.

X

Engage belt tongue ; in buckle =.

X

If necessary, pull upwards on the shoulder

section of the seat belt to tighten the belt

across your body.

All seat belts except the driver's seat belt are

equipped with a special seat belt retractor to

securely fasten child restraint systems in the

vehicle. For further information about special

seat belt retractors, see (

Y

page 61).

For more information about releasing the seat

belt with release button ?, see "Releasing

seat belts" (

Y

page 58).

Releasing seat belts

X

Press release button ?(

Y

page 57) and

guide belt tongue ; back towards belt

sash guide :.

!

Make sure that the seat belt is fully rolled

up. Otherwise, the seat belt or belt tongue

will be trapped in the door or in the seat

mechanism. This could damage the door,

the door trim panel and the seat belt.

Damaged seat belts can no longer fulfill

their protective function and must be

replaced. Visit a qualified specialist

workshop.

Belt warning for the driver and front

passenger

Regardless of whether the driver's and front-

passenger seat belts have already been

fastened, the 7 seat belt warning lamp will

light up for six seconds each time the engine

is started. It then goes out if the driver and

the front passenger have fastened their seat

belts.

If the driver's seat belt is not fastened when

the engine is started, an additional warning

tone will sound. The warning tone goes out

after approximately six seconds or once the

driver's seat belt is fastened.
If after six seconds the driver's or front-

passenger seat belt is not fastened and the

doors are closed, the 7 seat belt warning

lamp will remain lit:

R

until the driver's or front passenger's seat

belt is fastened

R

once the vehicle has exceeded a speed of

15 mph (25 km/h), in addition a warning

tone will sound with increasing intensity for

up to 60 seconds or until the driver's or

front-passenger seat belt is fastened.

If the driver or front passenger unfastens their

seat belt during the journey, the 7 seat

belt warning lamp lights up and the warning

tone sounds again.
The warning tone ceases after 60 seconds

even if the driver or front passenger has still

not fastened their seat belt. The 7 seat

belt warning lamp stops flashing, but remains

lit.
After the vehicle has come to a stop, the

warning tone will be reactivated and the

7 seat belt warning lamp will flash again

once the vehicle has exceeded a speed of

15 mph (25 km/h).
The 7 seat belt warning lamp will not go

out until:

R

both the driver and the front passenger

have fastened their seat belts.

or

R

the vehicle is stationary and a door is open.

i

For more information on the 7 seat

belt warning lamp, see "Warning and

indicator lamps in the instrument cluster,

seat belt" (

Y

page 386).

58

Occupant safety

Safety