beautypg.com

Driving and parking, Automatic transmission – Mercedes-Benz CL-Class 2013 Owners Manual User Manual

Page 279

background image

Automatic transmission

Important safety notes

G

WARNING

It is dangerous to shift the automatic

transmission out of parking position P or

neutral position N if the engine speed is

higher than idle speed. If your foot is not firmly

on the brake pedal, the vehicle could

accelerate quickly forward or in reverse. You

could lose control of the vehicle and hit

someone or something. Only shift into gear

when the engine is idling normally and when

your right foot is firmly on the brake pedal.

G

WARNING

Keep in mind that turning off the engine alone

only will shift the automatic transmission into

neutral position N automatically.
Always shift the automatic transmission into

park position P before turning off the engine.
Otherwise the vehicle could roll away which

could result in an accident and/or serious

personal injury.

DIRECT SELECT lever

Overview of transmission positions

The DIRECT SELECT lever is on the right of the

steering column.

P

Park position with parking lock

R

Reverse gear

N

Neutral

D

Drive

i

The DIRECT SELECT lever always returns

to its original position. The current

transmission position P, R, N or D appears

in the transmission position display

(

Y

page 278) in the multifunction display.

Engaging park position P

X

Push the DIRECT SELECT lever in the

direction of arrow P.

i

The automatic transmission shifts into

park position P automatically:

R

if you open the driver's door while the

vehicle is stationary in transmission

position D or R

R

if you open the door while traveling at

very low speeds in transmission position

D or R

!

If the engine speed is too high or the

vehicle is moving, do not shift the

automatic transmission directly from D to

R, from R to D or directly to P. The

automatic transmission could otherwise be

damaged.

Engaging reverse gear R
!

Only shift the automatic transmission to

R when the vehicle is stationary.

i

The ECO start/stop function is not

available when reverse gear is engaged.
Further information on the ECO start/stop

function (

Y

page 274).

X

When the vehicle is stationary, depress the

brake pedal.

X

Push the DIRECT SELECT lever up past the

first point of resistance.

Automatic transmission

277

Driving

and

parking

Z