Kontron JRexplus-LX - Manual (Page 25)

KTD-S0001-C Page 21 PS/2 Keyboard and Mouse Interface
JRexplus LX User's Guide
10 PS/2 Keyboard and Mouse Interface
The Super-I/O of the JRexplus LX supports a PS/2 keyboard and mouse. A PS/2 keyboard can be directly
connected to this interface. If you intend to use a PS/2 mouse connect a Y-cable to this interface. There are
many different Y-cables available on the market. Some cables have reverse keyboard/mouse signals. If your
keyboard and mouse do not work connect the keyboard to the mouse side and vice versa.
10.1 Connector
The keyboard/mouse interface is available through the standard miniDIN connector X8 (6 pins).
Header Pin Signal Name Function
1 KBDAT Keyboard data
2 MSDAT Mouse data
3 GND Ground
4 VCC 1) Power +5V
5 KBCLK Keyboard clock 2 1
4 3
6 5
6 MSCLK Mouse clock
Note: 1) To protect the external power lines of peripheral devices make sure that
- the wires have the right diameter to withstand the maximum available current.
- to enclosure of the peripheral device fulfills the fire-protecting conditions of IEC/EN 60950.