Kontron JRexplus-LX - Manual (Page 11)

KTD-S0001-C Page 7 Specifications
JRexplus LX User's Guide
3.3 Mechanical Specifications
Dimensions
➤
102 x 147 mm (4.0" x 5.8")
➤
Height on top approx. 16.5 mm
➤
Height on bottom approx. 6 mm
3.4 Electrical Specifications
Supply Voltage
The power supply connector (4 pins) requires +5V (+12V optionally). The additional ATX supplement con-
nector (2 pins) requires +5V standby.
➤
+5V DC ± 5%
➤
+12V DC ± 5% (optionally)
➤
+5V DC standby ± 5% (optionally)
Supply Voltage Ripple
➤
Maximum 100mV peak to peak 0 – 20 MHz
Supply Current (DOS prompt - single power supply +5V / ATX mode add +5VSB)
Power consumption tests were executed during the DOS prompt with 256 MB DDR SDRAM, CRT monitor, USB
keyboard and CF card as boot device (default BIOS settings).
Full Load
Soft Off S5
AT mode
Soft Off S5
ATX mode
[A] [W] [A] [W] [A] [W]
1.40 7.00 0.45 2.25 0.06 0.30
Supply Current (Windows ® XP SP3 - single power supply +5V)
The power consumption tests were executed during Windows ® XP SP3 by using a tool to stress the CPU
(100% load) and extensive 3D graphic. The boards were ran with 256 MB DDR SDRAM, CRT monitor, USB
keyboard & mouse and a CF card as boot device (default BIOS settings).
Full Load Idle Standby S3
[A] [W] [A] [W] [A] [W]
1.80 9.00 1.20 6.00 tbd tbd