Kontron KT690-mITX (BGA) - dual core User Manual
Kt690/mitx bga, User manual for the motherboards, Kt690 family
This manual is related to the following products:
Table of contents
Document Outline
- 1. Introduction
- 2. Installation procedure
- 3. System specification
- 4. Connector Definitions
- 4.1 Connector layout
- 4.2 Power Connector (ATXPWR)
- 4.3 Keyboard and PS/2 mouse connectors
- 4.4 Display Connectors
- 4.5 PCI-Express Connectors
- 4.6 Parallel ATA harddisk interface
- 4.7 Serial ATA harddisk interface
- 4.8 Firewire/ IEEE-1394 connectors.
- 4.9 Printer Port Connector (PRINTER).
- 4.10 Floppy connector (FLOPPY).
- 4.11 Serial Ports
- 4.12 Ethernet connectors.
- 4.13 USB Connector (USB)
- 4.14 Audio Connector
- 4.15 Fan connectors , FAN_CPU and FAN_SYS.
- 4.16 The Clear CMOS Jumper, Clr-CMOS.
- 4.17 TPM connector (unsupported).
- 4.18 Front Panel connector (FRONTPNL).
- 4.19 Feature Connector (FEATURE)
- 4.20 PCI Slot Connector
- 5. Onboard Connectors
- 6. System Ressources
- 7. Overview of BIOS features
- 8. BIOS Configuration / Setup
- 8.1 Introduction
- 8.2 Main Menu
- 8.3 Advanced Menu
- 8.3.1 Advanced settings – CPU Configuration
- 8.3.2 Advanced settings – IDE Configuration
- 8.3.3 Advanced settings – LAN Configuration
- 8.3.4 Advanced settings – Floppy Configuration
- 8.3.5 Advanced settings – Super IO Configuration
- 8.3.6 Advanced settings – Hardware Health Configuration
- 8.3.7 Advanced settings – Voltage Monitor
- 8.3.8 Advanced settings – ACPI Configuration
- 8.3.9 Advanced settings – Remote Access Configuration
- 8.3.10 Advanced settings – Trusted Support
- 8.3.11 Advanced settings – USB Configuration
- 8.3.12 Advanced settings – USB Mass Storage Device Configuration
- 8.3.13 Advanced settings – Clock Generator Settings
- 8.4 PCIPnP Menu
- 8.5 Boot Menu
- 8.6 Security Menu
- 8.7 Chipset Menu
- 8.8 Power
- 8.9 Exit Menu
- 9. AMI BIOS Beep Codes
- 10. OS setup
- 11. Warranty