Elecraft KPA500 Kit Assembly Manual - Manual (Page 45)

A1
Appendix A - Illustrated Parts List
Your kit contains a number of envelopes, boxes and packages of parts. Check the contents of each one carefully
against the following lists. You may find extra screws, nuts and other small parts provided in case you lose one.
They may be in a separate bag or mixed in with the others.
Spare Parts Bag
In addition to the parts listed below, a bag marked Spare Parts (E850480) is included. It contains a selection of
easily misplaced small parts to use in case you find one missing.
Printed Circuit Boards
Each board is packaged in its own ESD-safe bag identified by the part numbers shown below. The photographs
are provided to help you identify each board. You may find that some of the components or component
locations on the boards you receive are slightly different from those shown.
CAUTION
In addition to taking ESD precautions, be careful not to damage components on either side of the
circuit boards when handling them.
Power Cord and Fuses
ILLUSTRATION DESCRIPTION QTY.
ELECRAFT
PART NO.
Power Cable 1 E100388
Fuse Set (2 pcs): 12A for 120VAC
Mains. (These fuses are not supplied
with units provided with Schuko
connectors for 240 VAC Mains only.)
1 E850448
Fuse Set (2 pcs) 6A for 240VAC Mains 1 E850449