Detex V50 EE - Manual (Page 14)

104832 Page 14
Rotate bolt for minor
rod height adjustment.
Lock bolt head
firmly in place
in carriage with
plate, starwasher
and screw
FIG. 13
With Door closed
use tip of Bolt to
mark location
for Strike
FIG. 14A
Attach strike (P/N 103546)
to floor or threshold
Drill holes for strike mounting screws
and secure strike with screws.
Drill 3/16" hole for plastic anchor.
Drill 5/16" hole for metal anchor.
Drill 1" hole for
strike (minimum
depth - 3/4")
FIG. 14B
FIG. 14C
Place bottom bolt and rod
assembly into bottom bracket. Slide
the pin through the slot of the
bracket through the bolt and rod
assembly. Insert pin clip. Use
1/4 x 20 bolt at top of rod to obtain
final adjustment. When properly
adjusted, pin will be located at or
near the index mark on the bracket.
ROD
CLIP
PIN
BRACKET
BOLT
INDEX MARK FOR 1/8"
UNDERCUT
FIG. 12
INDEX MARK FOR 3/4" FROM FLOOR TO BOTTOM
OF DOON (UNDERCUT) & THRESHOLD