Dave Smith Instruments PRO 2 - Manual (Page 12)

2 Getting Started Dave Smith Instruments
To choose a program:
1. Turn the Bank Select knob to choose a bank (“U” indicates a User
bank; “F” indicates Factory).
2. Turn the Program Select knob to choose a program number.
3. Play the keyboard to audition the sound.
If you tweak any knobs or switches, the display will switch to a parameter display
screen. You can always continue choosing programs with the
program select
knob.
Using the Display
The Pro 2’s main parameters are accessible through its front panel knobs
and switches, but there are many additional parameters (as well as
numeric display of values) accessible through the OLED display.
For example, adjusting a knob or switch in the Oscillator section reveals
the value of that parameter in the display. The display also reveals addi-
tional oscillator parameters not found on the front panel. You can select
and edit these additional parameters using the four soft knobs and soft
keys located above and below the display.
The soft knobs are detented encoders that are useful for dialing in values
with precision. The soft keys select between various tabs.
FixRate A On Keyboard Paraphonic
GLIDE MODE RETRIGGER GATE SOURCE KEY ASSIGN
Pitch Wheel
Glide Mode Retrigger Gate Source Key Assign
Key Modes
Misc
Params
Write
Compare
Global
Program
Show
Revert
Param
soft knob 1
soft key 1 soft key 2 soft key 3 soft key 4
soft knob 2 soft knob 3 soft knob 4