Dave Smith Instruments PRO 2 - Manual (Page 41)

31 Pro 2 Operation Manual Amplifier Envelope
Delay: 0...127 —(In the
vca env amount
tab of the display) Sets a delay
between the time the envelope is gated on and when the Attack segment
actually begins.
Attack: 0...127 —Sets the attack time of the envelope.
Decay: 0...127 —Sets the decay time of the envelope.
Sustain: 0...127 —Sets the sustain level of the envelope.
Release: 0...127 —Sets the release time of the envelope.
Attack Decay Sustain Release Delay
DADSR Envelope
Amplitude
Time
Volume: 0...127 —(In the
vol
/
dist
tab of the display) Sets the volume of
the current program. This control is particularly useful for ensuring that
your sounds have roughly the same volume.
There is enough gain in the Pro 2’s voice architecture that, with some settings,
some mild clipping distortion may be heard. If this happens, try lowering the v
olume
,
and/or the vca e
nvelope
a
mount
(or v
elocity
a
mount
).
(VCA Envelope) Amount: 0...127 —(In the
vca env amount
tab of
the display) Sets the amount of modulation from the amplifier enve-
lope to the VCA. See
velocity amount
, for information about setting a
program’s velocity sensitivity.
Velocity Amount: 0...127 —(In the
vca env amount
tab of the display)
This enables keyboard velocity to modulate the VCA Envelope Amount.
It doesn’t enable keyboard velocity to directly control the VCA. To do
this, see the note that follows.