Dave Smith Instruments PRO 2 - Manual (Page 95)

85 Pro 2 Operation Manual Appendix D: MIDI Implementation
Appendix D:
MIDI Implementation
Pro 2 receives MIDI data according to the mode controls under g
lobal
.
In addition, there is interaction between some of the Program parameters
that determine the overall response of Pro 2 to MIDI data. Following are
the Global parameters that affect response to MIDI:
MIDI Channel: ALL, 1…16 — Selects the MIDI channel to send and
receive data, 1 to 16. All receives on any channel.
MIDI Clock Mode: See table — Selects the MIDI clock status:
Display MIDI Clock Setting
Off MIDI clock is neither sent nor received
Master MIDI clock is sent, but not received
Slave MIDI clock is received, but not sent
Slave Thru MIDI clock is received and passed to MIDI Out
MIDI Clock Cable: MIDI Port, USB— Selects the MIDI port by which
MIDI clock data is transmitted and received.
MIDI Parameter Send: NRPN, CC, Off— Changes to the values of Pro
2’s front panel controls are transmitted via MIDI as Non-registered
Parameter Number (NRPN) controllers or as Continuous Controllers
(CC). Transmission of parameters can also be turned off.
MIDI Parameter Receive: All, NRPN, CC, Off— Sets the method by
which Pro 2 receives parameter changes via MIDI. As with transmission,
NRPNs are the preferred method, though some controllers may only be
able to send CCs.
MIDI Control Enable: Off, On— When On, the synth will respond to
MIDI control messages, including Pitch Wheel, Mod Wheel, Pedal,
Breath, Volume, and Expression.
MIDI SysEx Enable: Off, On— When On, the synth will respond to
received MIDI SysEx messages, and will transmit them, when prompted,
to the MIDI Out.
MIDI Out Select: Off, MIDI, USB, MIDI+USB— Selects the output to use
for MIDI transmissions.