Dave Smith Instruments PRO 2 - Manual (Page 85)

75 Pro 2 Operation Manual A Few Tutorials
10. Adjust
threShold
until the audio begins to trigger the envelopes.
11. Adjust the envelope follower’s
attack
and
releaSe
if desired. (Access
these parameters in the display by turning the
oSc
1
Sub octave
knob on the
front panel.)
12. Adjust the font panel filter
cutoff
and
reSonance
parameters as desired.
13. Adjust any other parameters such as distortion and delay to tailor the
sound.
Connect an expression pedal to the Pro 2 and route it to filter cutoff in the
mode matrix for more real-time control over the wah effect.
Syncing the Sequencer with an External MIDI Device
It’s possible to sync the Pro 2’s sequencer with an external MIDI device
such as a Tempest drum machine or digital audio workstation using MIDI
clock.
To sync a sequence to an external MIDI clock:
1. Connect the external MIDI device’s MIDI Out to the MIDI In of the
Pro 2.
2. Set the external MIDI device to MIDI Clock Master.
3. On the Pro 2, press the
global
button and select
midi clock mode
(menu
item 4). Then set
midi clock mode
to
Slave
.
4. Also in the
global
menu, set
midi clock cable
to
midi port
.
5. Press the
Sequencer
button to turn on the sequencer.
6. Set
play Source
to
Sequencer
.
7. Set
play mode
to
normal
.
8. Start MIDI playback on the external device. The Pro 2 sequencer
will start and stop playback in response to MIDI Start/Stop/Continue
messages.