Dave Smith Instruments PRO 2 - Manual (Page 24)

14 Global Settings Dave Smith Instruments
32 . Calibrate Sliders— Press Start Cal (soft key 1) and follow the
onscreen instructions to calibrate the sliders.
33 . Calibrate Wheels— Press Start Cal (soft key 1) and follow the
onscreen instructions to calibrate the wheels.
34 . Autotune Filters— Press Start Tuning (soft key 1) and follow the
onscreen instructions to tune filters 1 and 2.
The sliders, wheels, and filters are calibrated at the factory and under normal
circumstances should not require re-calibration or re-tuning.
35 . Reset Globals— Sets the global parameters to the factory default
settings.
36 . Dump Current Program— Transmits the current program in SysEx
format via the selected MIDI port. (See “9. MIDI Sysex Cable.”)
Dumped programs will load back into the same bank and program loca-
tion in memory when received by the Pro 2 via MIDI.
37 . Dump Current Bank— Transmits the current bank in SysEx format
via the selected MIDI port. (See item 10, “MIDI Sysex Cable.”) Dumped
banks will load back into the same bank location in memory when
received by the Pro 2 via MIDI.
38 . Dump All User Banks— Transmits all four User Banks in SysEx
format via the selected MIDI port. (See item 10, “MIDI Sysex Cable.”)
Dumped banks will load back into the same bank location in memory
when received by the Pro 2 via MIDI.