Dave Smith Instruments PRO 2 - Manual (Page 57)

47 Pro 2 Operation Manual Arpeggiator
Octave Range: 1 Octave, 2 Octaves, 3 Octaves— Set to 1 Octave, only
the keyed notes are arpeggiated. Set to 2 Octaves, the keyed notes and
the notes one octave above them arpeggiate. Set to 3 Octaves, the keyed
notes and the notes one and two octaves above them arpeggiate.
Arp Auto Latch: Off, On— Works in conjunction with
hold
. When
hold
and
arpeggiator
are on and
arp auto latch
is off, played notes are held
on and arpeggiated, with additional played notes added to the held notes
and the arpeggio.
When
arp auto latch
and the
hold
switch are both on, played notes
are latched on. Removing your hands from all keys and then playing
an additional note or notes causes the held notes to be released and the
newly played note(s) to be latched on. As long as at least one key is held,
pressing additional keys will add to the arpeggio.
Repeats: 0…3— Set to 0, each note in the arpeggio plays once. Set to
1, each note in the arpeggio plays once and then repeats once, which is
a long way of saying each step plays twice. The maximum number of
repeats is 3 (each step plays four times).
BPM: 30…250— Sets the tempo for the arpeggiator in BPM (beats per
minute). The
tap tempo
LED flashes at the BPM rate. When Sync is
turned on for an LFO or Delay, the BPM rate affects its LFO frequency
or delay time. When syncing to an external MIDI clock source, the BPM
setting has no effect.
Tap Tempo— Tapping the
tap tempo
button sets the tempo from 30 to
250 BPM. The LED flashes at the BPM rate you set. For best results, tap
the button 4 times.