Dave Smith Instruments PRO 2 - Manual (Page 79)

69 Pro 2 Operation Manual Play List
To recall programs from a play list:
1. Press the
cue
/
play liSt
button.
2. Press soft key 1, 2, 3, or 4 to select the desired Set (1-4).
3. Press a sequencer step button (1-16) to choose the program associated
with that step button.
Cue
Cue lets you continuously run the sequencer while you switch from
program to program. The sequence and sound associated with each
program will play until it reaches its end, then change to the next
program (and the sequence associated with it). If you save multiple
versions of the same program, each with a different sequence, you can
use Cue to switch through them in real time, effectively stringing multi-
ple sequences together to create a “song” in real time.
To use Cue:
1. Press the
Sequencer
button to turn on the sequencer.
2. Press
play
/
Stop
to start the sequencer.
3. Press and hold the
cue
/
play liSt
button.
4. Use soft knob 1 (p
rogram
S
elect
) and soft knob 2 (b
ank
S
elect
)
to choose the desired program. Programs can also be selected from
play list sets 1-4, using soft keys 1-4 and the numbered sequencer step
buttons as described previously in the Play List section.
5. Release the
cue
/
play liSt
button. When the currently playing sequence
reaches its end (its reset point) the Pro 2 switches to the newly chosen
program and sequence.
6. Repeat steps 3- 5 as desired.
Pressing the
reset
button while a sequence plays is a convenient way to add
variation to a sequence by changing its length in real time. Each time you press
reset
,
the sequence immediately goes back to step 1.