Dave Smith Instruments PRO 2 - Manual (Page 64)

54 Sequencer Dave Smith Instruments
3. Repeat for any additional steps/rests.
4. To listen to the sequence, make sure the
Sequencer
button is on, then
press
play
/
Stop
.
If you are working with a 32-step sequence, use the
steps
1-16 and
steps
17-32
buttons to toggle between the two sets of steps.
Notes
Slew
Velocity
Note: C5 Slew:0 Tie Vel: 96
C
5
C
5
* *
* *
* *
C
5
C
5
C
5
C
5
C
5
C
5
C
5
C
5
C
5
C
5
C
5
C
5
C
5
Rest/Tie
steps 3-4
have rests
Adding Ties
Ties allow you to increase the duration of a note in a sequence (i.e. the
number of steps that it’s held). You can add ties to an existing sequence,
or if you’re creating a sequence in step mode, you can add them as you go.
Sequence step LEDs appear slightly dimmed on steps that are tied.
To add ties to an existing sequence:
1. Hold down the
track Select
button and press the step LED with the
same number as the track you want to edit. Release the
track Select
button.
2. Press and continue to hold the LED button for the step where the tie will
start.
3. Press the LED button for the step where the tie will end.
4. Release the buttons.
5. To create additional ties, repeat steps 1-4.