Dave Smith Instruments PRO 2 - Manual (Page 53)

43 Pro 2 Operation Manual Low Frequency Oscillators
Phase: 0...127 —(In the
lfo control
tab in the display) Used in
conjunction with Wave Reset, Phase sets the initial phase, from 0 to 360
degrees, at which the LFO wave shape starts when keyed on. Each step
represents 2.8125°, so a value of 32 equals 90°, 64 equals 180°, and so on.
Use Phase to offset the start point when Wave Reset is on. For Phase to have
any noticeable effect, Wave Reset must also be turned on for that LFO. If the LFO is
free-running—that is, with Wave Reset off—there is no fixed start point from which the
phase can be offset.
0°
90°
180°
64 96 127 32 0
Phase Offset
in Degrees
Phase Parameter
Value
270°
360°