Compex Technologies WP11A+ User Manual
Page 98
Appendix III Configuration and Commands on Telnet Interface
88
Command
Examples
show tcp stat
show ethernet address
show gateway
set gateway There are also some other commands such as: AIII-3 How to recover Compex WP11A+ from failed firmware This procedure details the upgrading of firmware to Compex WP11A+. Compex WP11A+ will automatically switch to loader mode if the main code is 1. Disconnect Compex WP11A+ from the network. 2. Connect one end of a MDIX cross-connect (MDIX) Ethernet cable on the WAN port of Compex WP11A+ and the other end to your PC/notebook LAN adapter. 3. Power ON the device and the PC/notebook. You will notice that the DIAG LED blinking rapidly. This indicates that the loader mode has discovered firmware 4. Insert the Product CD to your CD-ROM Drive.
set ip private
set ip lan
add ip routing
delete ip routing
corrupted. Code can be corrupted due to power surges or it could be uploading
newer firmware results in router failing to startup.
error and is awaiting uploading.