Compex Technologies WP11A+ User Manual
Page 51
Chapter 7
Setting up WAN using Wireless Routing Client
41
7.2
Configuring Compex WP11A+ as Wireless Routing Client through Web
Interface
Assuming that Compex WP11A+ is in the default setting.
1. Activate
the
uConfig program, click on the “OpenWeb” button.
2. Go to the CONFIGURATION menu and click on Network Mode Selection.
Select Wireless Routing Client mode and click on the “Apply” button. Next, click
on the “Yes” button to reboot the device.
Figure 7.2a
Selection of Network Mode – Wireless Routing Client
NOTE
Do not hit the “Logon” button. This will not lead you to the authentication
page!!
3. Go
to
uConfig program and click on the “OpenWeb” button. Logon again and now
Compex WP11A+ is in Wireless Routing Client Mode.