Compex Technologies WP11A+ - Manual (Page 53)

Chapter 7 Setting up WAN using Wireless Routing Client
43
6. Enter your encryption key. The parameters take in hexadecimals.
Figure 7.2d Encryption entries for 64-bit
Figure 7.2e Encryption entries for 128-bit
7. Click on the “Save” button and then reboot to take effect.
8. If you want to configure WAN setup, proceed to WAN Setup and the following
GUI will appear. By default, Compex WP11A+ is pre-configured with Dynamic IP,
which is suitable for most Cable Internet service providers.