Compex Technologies WP11A+ - Manual (Page 59)

Chapter 8 Configuration on Various WAN Type
49
The WAN Setup screen below displays the PPPoE configuration that allows
you to configure your ADSL access.
Figure 8.3b WAN PPPoE Configuration
NOTE
Singapore users should follow the format below to enter their usernames:
Pacific Internet Broadband: [email protected]
SingNet Broadband:
[email protected]
QALA DSL: [email protected]
4. After you have entered the required field, click on the “Save” button to
update the configuration. Reboot the Compex WP11A+.
Now, you may activate the Internet Explorer and start surfing the Internet.
Once the Compex WP11A+ is up and running, you might want to add
advanced configurations such as Filtering to better manage your LAN. For
details, refer to the “Packet Filtering” section on Page 64.
Username
Enter your ADSL login username in
this field.
Password
Enter your ADSL login password in
this field.
Service Name
Certain ADSL Internet
subscriptions require the user to
key in the service name. You may
do so in this field.
Idle Timeout
Idle Timeout is the
duration of non-activity
at the WAN port for
disconnection.
Non-Standard PPPoE Ethernet Type
If you are using a Non-Standard PPPoE
ADSL connection like that of Pacific
Internet Broadband using a 3COM
ADSL modem, you will need to check
the box next to Use non-standard
PPPoE Ethernet type. If you are unsure
about the PPPoE type, leave the box
unchecked.