Compex Technologies WP11A+ - Manual (Page 57)

Chapter 8 Configuration on Various WAN Type
47
8.2.2 How to Configure @HOME Cable Service
Many broadband services require a simple DHCP request for connection. Two
such cable services are Optus@Home and Roger@Home.
To configure the @HOME Cable Service,
1. Follow the steps stated in the previous “Configuring for Singapore
Cable Vision (SCV) Service” section.
2. Next, click on System Identity at the Command window under the
SYSTEM TOOLS menu and enter the required field as shown.
Figure 8.2b System Identity
3. Click on the “Apply” button to set the System Identity.
4. Reboot your device.
5. Now, you can start surfing the Internet. If you want to have advanced
configuration on your device, please refer to the “Packet Filtering”
section on Page 64 or the “Configuring Network Address Translation”
section on Page 57.
System Name
You can obtain this information
from your ISP.
System Contact and Location
You may leave it as it is or fill in
your ISP contact and location
information. They are for your
future reference only.