Compex Technologies WP11A+ - Manual (Page 84)

Chapter 13 Using SYSTEM TOOLS menu
74
13.7 Logout
With the web browser, logging out has never been easier. Simply click on the “Logout”
button and you will exit the web-based environment. The system will prompt you to log
in again as shown in Figure 13.7a. If you need access to the Compex WP11A+
Configuration again, please activate uConfig program again, regardless which mode
you may have previously worked in.
Figure 13.7a System prompt to log in again
NOTE
Do not use the Logon button, use uConfig program instead, to prevent any
conflict in IP Address.
13.8 Exit uConfig
Upon completion of the Compex WP11A+ configuration, go to Command window and
select Exit uConfig function. This will close the uConfig program. Notice the icon
located at the taskbar (bottom of your screen) has vanished! This shows that you have
successfully exited from uConfig program.
NOTE
If you need to configure Compex WP11A+ again, it is strongly recommended
you activate the uConfig program to access the web-based interface to reduce
any complication.