Compex Technologies WP11A+ - Manual (Page 21)

Chapter 3 Hardware Installation
11
2. Place the Compex WP11A+ in a well ventilated area.
3. Place the device in a standing position.
4. Connect your PC to the Ethernet port of Compex WP11A+ using an MDIX UTP RJ45
cable. Please note that before your PC can access to the Internet, the NIC adapter and
TCP/IP protocol have to be installed and configured first.
5. Plug the AC power adapter. Please use only the correct power adapter supplied by Compex.
6. Check if the power LED is lighted up.