Sony DCR-TRV7 - Manual (Page 98)

Trouble check
others
Symptom Cause and/or corrective actions
While editing using the DV connecting
cable, recording picture cannot be
monitored. • RemoN’c the DV connecting cable, and connect it
again.
The camcorder becomes warm. • If the power of the cammcorder is on for a long time,
it becomes warm, which is not malfunction.
The supplied Remote Commander does
not work.
No function works though tlio power is
on.
Something is blocking the infrared ravs.
-> Remove the obstacle.
The battery is not inserted with the correct polarity.
-> Insert the battery with the correct polarity, (p. 114)
The batteries are dead.
Insert new ones. (p. 114)
Disconnect the connection plug on the battery pack or
on the AC power adaptor, then reconnect it in about 1
minute. Turn the power on. If the functions still do
not work, open the LCD screen and press the RESET
button above the FOCUS switch using a sharp-pointed
object. (If you press the RESET button, all the settings
including the date and time return to the default.)
(p. 81)
The numbers or letters of 5 characters is
displayed as a counter. • Self-diagnosis function was activated.
See the table in page 100 and treat the camcorder
apropriately.
AC power adaptor
Symptom Corrective actions
The VTR/CAMERA or CHARGE lamp
does not light. • Disconnect the power cord. After about 1 minute,
reconnect the power cord. (p. 7)
The CHARGE lamp flashes. • See the chart on the next page.
98