Dell 5100cn Color Laser Printer - Manual (Page 77)

Multipurpose feeder Face down Logo enters the printer
first
Selecting Pre-punched Paper
Pre-punched paper brands can differ in the number and placement of holes and in manufacturing techniques.
To select and use pre-punched paper:
Test paper from several manufacturers before ordering and using large quantities of pre-punched paper.
Paper should be punched at the paper manufacturer and not drilled into paper already packaged in a ream. Drilled
paper can cause jams when multiple sheets feed through the printer. This may result in a paper jam.
Pre-punched paper can include more paper dust than standard paper. Your printer may require more frequent
cleaning and feed reliability may not be as good as standard paper.
Weight guidelines for pre-punched paper are the same as non-punched paper.
Transparencies
You can load up to 75 transparencies in the multipurpose feeder for a single print job. Before buying large quantities of
any print media, Dell recommends trying a sample first.
When printing on transparencies:
Set the Paper Type to Transparency from the printer driver to avoid damaging your printer.
Use transparencies designed specifically for laser printers. Do not use regular transparencies. Transparencies must
be able to withstand temperatures of 205°C (401°F) without melting, discoloring, offsetting or releasing hazardous
emissions.
Avoid getting fingerprints on the transparencies. This may result in poor print quality.
Before loading transparencies, fan the stack to prevent sheets from sticking together.
Selecting Transparencies