Dell 5100cn Color Laser Printer - Manual (Page 30)

Ethernet
802.3
Selects IEEE802.3 frame type.
Ethernet
802.2
Selects IEEE802.2 frame type.
Ethernet
SNAP
Selects SNAP frame type.
Current Frame
Type
Displays the current frame type.
Network Address Displays the IPX network address.
NetWare Device Name* 1 Specifies the printer name up to 47 alphanumeric characters.
For PServer Mode, set the Print Server Name (Print Server Object Name). For RPrinter
Mode, set the Remote Printer Name (Printer Name in Bindery and Printer Object Name
in Directory). The original setting remains valid if no input is made.
Active
Mode
Bindery:
PServer
Mode
Selects this option when using Directory: PServer Mode in Bindery: PServer Mode.
Bindery:
RPrinter
Mode
Selects this option when using Directory: RPrinter Mode in Bindery: PServer
Mode.
Directory:
PServer
Mode
Selects this option when using Directory: PServer Mode in Bindery: RPrinter
Mode.
Directory:
RPrinter
Mode
Selects this option when using Directory: RPrinter Mode in Bindery: RPrinter
Mode.
Tree Name* 1 Specifies the tree name up to 32 alphanumeric characters. Configure this item only
when Directory: PServer Mode or Directory: RPrinter Mode is selected.
Context Name Specifies the context name of the Print Server Object up to 255 alphanumeric
characters. Configure this item only when Directory: PServer Mode or Directory:
RPrinter Mode is selected.
File Server
Name*
1
Specifies the file server name up to 47 alphanumeric characters. Configure this item
only when Bindery: PServer Mode or Bindery: RPrinter Mode is selected.
Print Server
Name*
1
Specifies the print server name up to 47 alphanumeric characters. Configure this item
only when Bindery: RPrinter Mode or Directory: RPrinter Mode is selected.
Polling Interval Sets the time interval from when print data enters the print queue until printing starts.
The setting range is from 1 to 1000 seconds. The original setting remains valid if no
input is made. Configure this item only when Bindery: PServer Mode or Directory:
PServer Mode is selected.
Receive Time-Out Sets the timeout period that confirms data has been received. The setting range is
from 1 to 1000 seconds.
NCP
Packet
Burst
On Uses NCP packet burst.
Off Does not use NCP packet burst.
Password Sets the print server password up to 32 alphanumeric characters. Configure this item
only when Bindery: PServer Mode or Directory: PServer Mode is selected.
Confirm Password Allows you to confirm the configured password by re-entering the same password.
Status
Information
Displays the messages according to the conditions of the printer.
Logical Printer
Number
Displays the printer number during Bindery: RPrinter Mode or Directory: RPrinter
Mode.