Dell 5100cn Color Laser Printer - Manual (Page 109)

FTP On*
Enables the FTP port.
Off
Disables the FTP port.
NetWare
*1 On*
Enables the NetWare port.
Off
Disables the NetWare port.
SNMP UDP On*
Enables the UDP.
Off
Disables the UDP.
IPX* 1 On*
Enables the IPX.
Off
Disables the IPX.
E-Mail Alert On*
Enables the E-Mail Alert feature.
Off
Disables the E-Mail Alert feature.
EWS On*
Enables an access to Dell Printer Configuration Web Tool embedded in the printer.
Off
Disables an access to Dell Printer Configuration Web Tool embedded in the printer.
AppleTalk*
1 On*
Enables the AppleTalk port.
Off
Disables the AppleTalk port.
*1 Only displayed when an optional multi protocol card is installed.
IPX/SPX
Purpose:
To configure the IPX/SPX settings. The change becomes effective after the printer is turned off and then on again.
Values:
Auto*
Automatically sets the frame type.
Ethernet II
Uses the Ethernet II frame type.
Ethernet 802.3
Uses the IEEE802.3 frame type.
Ethernet 802.2
Uses the IEEE802.2 frame type.
Ethernet SNAP
Use the SNAP frame type.
NOTE: The IPX/SPX menu is only displayed when an optional multi protocol card is installed on the printer.