Dell 5100cn Color Laser Printer - Manual (Page 160)

Settings
menu. See " Paper Type ."
· Verify that the correct print media is being used.
· The imaging drum may need to be replaced. Change the imaging drum.
· The developer is damaged. Contact Dell. See "Contacting Dell" in the Owner's Manual.
Toner smears or print
comes off page.
· If you are printing on an uneven print surface, change the Paper Type settings in the Tray
Settings
menu. See " Paper Type ."
· Verify that the print media is within the printer specifications.
· The fuser is old or damaged. Replace the fuser. See "
Replacing the Fuser and Separator
Roller ".
Toner spots appear on
the page/printing is
blurred.
· Check the toner cartridge to make sure it is installed correctly.
· Change the imaging drum. See "
Replacing the Imaging Drums ."
· The developer is damaged. Contact Dell. See "Contacting Dell" in the Owner's Manual.
Entire page is white. · Make sure the packaging material is removed from the toner cartridge.
· Check the toner cartridge to make sure it is installed correctly.
· The toner may be low. Change the toner cartridge. See "
Replacing the Toner Cartridge ."
· The developer is damaged. Contact Dell. See "Contacting Dell" in the Owner's Manual.
Streaks appear on the
page.
· The toner may be low. Change the toner cartridge. See " Replacing the Toner Cartridge ."
· If you are using preprinted forms, make sure the toner can withstand temperatures of 0 °C to
35 °C.