Dell 5100cn Color Laser Printer - Manual (Page 111)

Purpose:
To specify PostScript communication protocol for each interface. The change becomes effective after the printer is turned
off and then on again.
Values:
Auto*
Automatically selects a tray according to the paper size and type settings of the job being printed except for
the multipurpose feeder.
RAW
Used when no special processing is required for data.
Standard
Used when the communication protocol is in ASCII interface.
BCP
Used when the communication protocol is in binary format.
TBCP
Used when the communication protocol supports both ASCII and binary data to switch between them
according to the specified control code.
PCL
Use the PCL to change printer settings that only affect jobs using the PCL emulation printer language.
NOTE: Values marked by an asterisk (*) are the factory default menu settings.
Input Tray
Purpose:
To specify the input tray.
Values:
Auto*
Automatically selects a tray according to the paper size and type settings of the printing job.
Tray 1
The paper is fed from the standard 500-sheet tray.
Tray 2*
1
The paper is fed from the optional 500-sheet tray module or 1000-sheet tray module.
Tray 3
*2
The paper is fed from the optional 1000-sheet tray module.
Tray 4
*2
The paper is fed from the optional 1000-sheet tray module.
MPF
The paper is fed from the multipurpose feeder.
*1 Only displayed when an optional 500-sheet tray module or 1000-sheet tray module installed on your printer.
*2 Only displayed when an optional 1000-sheet tray module, or both the optional 500-sheet tray module and 1000-sheet
tray module are installed on the printer.
Paper Size