Dell 5100cn Color Laser Printer - Manual (Page 280)

TAB
8-column tab stop
BS
Backspace 1 character
The dellpsif is the hard link file of txt2ps2.
The dellpsif filter will be used as the IF filter specified by /etc/printcap.
The lpd daemon will specify the following command options and start up the dellpsif filter.
dellpsif -w width -l length -i indent -n login -h host accountfile
In addition, options useable by txt2ps2 can be specified by the /usr/local/dellbin5100cn/.dellpsdefault5100cn file.
With this option, detailed control can be achieved. However, if the input data are PostScript files, only the following
options of txt2ps2 will become valid.
-d
Enables the short-edge binding feature. When it is specified, the printing direction or position will be adjusted and
both sides of the paper printed so that the shorter edge of the pages can be bound.
-D
Enables the long-edge binding feature. When it is specified, the printing direction or position will be adjusted and
both sides of the paper printed so that the longer edge of the pages can be bound.
-Itray-input
Specifies the paper tray.
The parameters to be able to specify are the same as txt2ps2.
-t
Turns on the save toner mode for printing. The print result will be fainter than that of normal printing. In some
cases, this option will be ignored.
-E
This function turns on the image enhancement function. In some cases, this option will be ignored.
-Nc=copies
Specifies the number of output copies (the value of copies must be a positive integer).
-Cl
Specifies that printing be collated. If the copies option is not specified, this option will be ignored.
-ps
The input file will be processed as the PostScript file. If the file does not begin with %!, %! will be output to the
beginning line. For files with %!, this option will be ignored.
-M=type
Specifies multipurpose feeder Paper Type.
If this option is not specified, multipurpose feeder Paper Type of the printer can be used.
-Mfo=mode
Specifies orientation for multipurpose feeder.
-Pon
Specifies Alternate Tray.
-St=mode