Dell STREAK mobile User Manual

Page 55

Using Your Dell™ Streak

To erase all data from your device

CAUTION:

The following steps will erase all the data including your Google

account and downloaded applications from your device. Ensure that you back up
all the required data before you proceed.

1 Touch the Home button

 Menu button  Settings Privacy

Factory data reset.

2 Touch Reset device.

NOTE:

You need to draw your screen unlock pattern if it is enabled.

3 Touch Erase everything after you read the warning.

To reset your device to the default state

CAUTION:

The following steps will restore your device to the default state and

erase all data and downloaded applications stored on it. Ensure that you back up
all the required data before you reset the device.

1 Press and hold the power button

and then touch the Power off

option on the screen to turn off the device.

2 Simultaneously press and hold the volume up button

and volume

down button

3 Without releasing the volume buttons, press and hold the power button,

until the device turns on the configuration screen.

4 Press the volume buttons to move the highlight bar on the screen to the

Factory reset option.

5 Press the Camera button

to start the reset process.

6 Wait for the device to reboot.

To upgrade the software version on your device

CAUTION:

The following steps will erase all data including your Google account

and downloaded applications from your device. Ensure that you back up all the
required data before you proceed.

the configuration screen.

2 Press the volume buttons to move the highlight bar to the Software

upgrade via Update.pkg on SD Card option, and press the Camera button

to confirm your selection.

bk0_en.book Page 55 Sunday, May 30, 2010 12:34 PM