Dell Venue 11 Pro (5130-32Bit) - Manual

Month yyyy
Statement of Volatility
– Dell Venue 11 Pro-5130
CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the
problem.
The Dell Venue 11 Pro contains both volatile and non-volatile (NV) components. Volatile components lose their data
immediately after power is removed from the component. Non-volatile (NV) components continue to retain their data even
after power is removed from the component. The following NV components are present on the Dell Venue 11 Pro system
board.
Table 1. List of Non-Volatile Components on System Board
Description
Reference
Designator
Volatility Description
User
Accessible
for external
data
Remedial Action (Action
necessary to prevent loss of
data)
Embedded
Flash in
embedded
controller
MEC1641 U3001 288 KB user space of
embedded Flash memory
with direct JTAG & LPC-
protected 2 pages at or Near
Top of memory for
password. No N/A
Panel
EEDID
EEPROM
Part of panel
assembly Non Volatile memory
64Kbytes. No Part of panel assembly
System
BIOS U2802
Non Volatile memory, 128
Mbit (16 MB) Serial flash
(SpiFlash ROM) which
contains System BIOS,
Video BIOS, and TXE which
supports Secure Boot,
accelerating commonly used
encryption algorithm in HW
and enables Security Apps
for basic boot operation. No N/A
Video
BIOS U2802 As stated above, embedded
in the 128-Mbit serial flash
(SpiFlash ROM) No
N/A
System
Memory –
LPDDR3
memory
System
Memory –
DDR3L
memory
U1601,U1701
U1401,U1402,
U1601,U1602
Volatile memory
2GB 1.2V LPDDR3
memory, two FBGA dies,
each die contains 8 Gb
capacity (x32, 2 channels)
2GB 1.35V DDR3L-RS
memory, four FBGA dies,
each die contains 4Gb
capacity (512MB, 32Mb x 16
x 8 banks)
Yes Power off system
Embedded
Flash in
embedded
U3101 Embedded Flash –
NV-RAM 8KB user flash.
No N/A