Dell Axim X50 User Manual
Using cisco, Leap wireless lan security
![background image](/manuals/609842/1/background.png)
www
.dell.com | support.dell.com
Using Cisco
®
LEAP Wireless LAN Security
Your Dell Axim X50 supports 802.1X network authentication using Cisco
LEAP. Cisco LEAP can be configured using the Odyssey Client application.
NOTE:
Before starting, ensure that your Wireless On/Off button is in the
On position.
NOTE:
LEAP is not supported on a peer-to-peer network.
NOTE:
LEAP is not supported on the low end version of Axim X50.
To start the application do the following steps.
1 Tap Start
→
Settings
→
Connections
→
Odyssey Client icon.
2 Tap Settings
→
Enable Odyssey to start using the client.
To start using LEAP, perform the following steps.
1 Obtain the following information from your network administrator:
•
Network name
•
Association mode
•
Encryption method
2 From the Odyssey Client window, tap on Settings
→
Configure
→
Add.
3 Enter the network name (SSID) if known, or tap on Scan to search the
available Access Points. Tap Next.
4 LEAP will only support an infrastructure network, so do not change the
default settings in the drop-down menu. Tap Next.
5 Fill in Association Mode and Encryption method. Tap Next.
September 2004
Document Outline
- Using Cisco® LEAP Wireless LAN Security
- 使用 Cisco(R) LEAP 无线 LAN 安全保护
- Sécurité de réseau local sans fil Cisco® LEAP
- Verwenden von Cisco® LEAP Wireless LAN- Sicherheit
- Uso della protezione per LAN senza fili Cisco® LEAP
- Cisco(R) LEAP Wireless LAN セキュリティ
- Korzystanie z zabezpieczeń sieci bezprzewodowej Cisco® LEAP Wireless LAN Security
- Como usar a segurança de LAN sem fio Cisco® LEAP
- Cómo utilizar la seguridad LAN inalámbrica Cisco® LEAP