Dell 1600n Multifunction Mono Laser Printer - Manual (Page 62)

Property Description
Copies
Copies allows you to choose the number of copies to be printed. You can enter up to 999.
Size
The Size option allows you to choose the size of paper loaded in the paper tray.
If the required size is not listed in the Size box, click Add Custom. When the Custom Page
Size Custom Pages Names... window appears, set the paper size and click Ok. The setting
appears on the list so that you can select it.
Source
Make sure that Source is set to the corresponding paper tray.
The Manual Feed source is used when printing to special materials. You need to load one
sheet at a time into the manual feeder. See
page 64 .
If the paper source is set to Auto Select, the multi-function printer automatically picks up
print materials from the manual feeder first and then the paper tray.
Type
Make sure that Type is set to Printer Default. If you load a different type of print material,
select the corresponding paper type. For more information about print materials, refer to
"Paper Handling" on page 47 .
If you are using cotton paper, set the paper type to Thick for the best results.
If you are using recycled paper or color paper, select Color Paper.
First
Page
This setting allows the first page of a print job to be taken from a different paper source.
Graphics Tab
Use the following graphic options to adjust the print quality for your specific printing needs. See page 71 for
more information about accessing printer properties.
Click the Graphics tab to display the properties shown below.