Dell 1600n Multifunction Mono Laser Printer - Manual (Page 105)

Adjusting the Document Resolution
Use the Document Resolution setting to improve the output quality of the original or if scanning
photographic materials.
Press . 1.
By pressing or the scroll button ( or ), you can choose from Standard, Fine, Super
Fine, Photo and Color. 2.
When the mode you want to use displays, press to save the selection.3.The document types recommended for the resolution settings are described in the table below.ModeRecommended for:StandardDocuments with normal sized characters.FineDocuments containing small characters or thin lines or documents printed using a dot-
matrix printer.Super
FineDocuments containing extremely fine detail. The super fine mode is enabled only if the
remote printer also supports the Super Fine resolution. See the notes below.PhotoDocuments containing shades of gray or photographs.ColorDocuments with colors. Sending a color fax is enabled only if the remote printer supports
color fax reception and you send the fax manually. In this mode, the memory
transmission is not available.When you select "Color", and then "USE ON HOOK DIAL FOR COLOR FAX" displays for 5
seconds, press .NOTE: Faxes scanned in Super Fine resolution will transmit at the highest resolution supported by thereceiving device.Sending a Fax AutomaticallyLoad the document(s) face up with top edge in first into the ADF.1.ORPlace a single document face down on the scanner glass.For details about loading a document, see page 120.Adjust the document resolution to suit your fax needs (see page 122).2.If you need to change the contrast, see page 118.Enter the remote fax phone number using the number keypad.3. Pages: 1 … 103 104 105 106 107 … 188 wrong Brand wrong Model non readable See also other documents in the category Dell Multifunction Devices: 2335DN (284 pages) 2335DN (1 page) 2335DN (8 pages) 1600n Multifunction Mono Laser Printer (134 pages) Sitemap 3.
The document types recommended for the resolution settings are described in the table below.
Mode Recommended for:
Standard Documents with normal sized characters.
Fine Documents containing small characters or thin lines or documents printed using a dot-
matrix printer.
Super
Fine Documents containing extremely fine detail. The super fine mode is enabled only if the
remote printer also supports the Super Fine resolution. See the notes below.
Photo Documents containing shades of gray or photographs.
Color Documents with colors. Sending a color fax is enabled only if the remote printer supports
color fax reception and you send the fax manually. In this mode, the memory
transmission is not available.
When you select "Color", and then "USE ON HOOK DIAL FOR COLOR FAX" displays for 5
seconds, press .
NOTE: Faxes scanned in Super Fine resolution will transmit at the highest resolution supported by the
receiving device.
Sending a Fax Automatically
Load the document(s) face up with top edge in first into the ADF. 1.
OR
Place a single document face down on the scanner glass.
For details about loading a document, see page 120 .
Adjust the document resolution to suit your fax needs (see page 122 ). 2.
If you need to change the contrast, see page 118 .
Enter the remote fax phone number using the number keypad. 3.