Dell 1600n Multifunction Mono Laser Printer - Manual (Page 129)

To assign the TCP/IP address automatically using a DHCP or BOOTP server on your network, take the
following steps:
Press 1.
Press the scroll button ( or ) until "Configuration" displays on the bottom line. Press .2.Press the scroll button ( or ) to display "TCP/IP" and press . 2.
Press the scroll button ( or ) to display "TCP/IP" and press 3.
Press the scroll button ( or ) to display "DHCP" on the bottom line and press .4.To assign the address from the BOOTP server, press when "BOOTP" displays on the bottom
line. 4.
To assign the address from the BOOTP server, press 5.
Restoring the Network Configuration
You can return the network configuration to its default settings.
Press 1.
Press the scroll button ( or ) until "Clear Setting" displays on the bottom line. 2.
Press .3.The first available menu item, "Yes" displays on the bottom line.Press to restore the network configuration. 3.
The first available menu item, "Yes" displays on the bottom line.
Press 4.
Power the multi-function printer off and back on or reset the network interface card. 5.
Resetting the Network Interface Card
You can reset the network interface card when a network problems occurs.
Press 1.
The first available item, "Reset NIC", displays on the bottom line.
Press .2.The first available menu item, "Yes" displays on the bottom line.Press to reset the network interface card. 2.
The first available menu item, "Yes" displays on the bottom line.
Press 3.