Dell 1600n Multifunction Mono Laser Printer - Manual (Page 161)

Installing Options
Precautions When Installing Printer Options
Installing Printer Memory
Installing an Optional Tray 2
Precautions When Installing Printer Options
Never remove the control board while the printer is plugged in.
To avoid the possibility of an electrical shock, always disconnect the power cord when installing or removing
ANY internal or external printer option.
The control board and internal printer memory are sensitive to static electricity. Before installing or removing
an internal printer memory, discharge static electricity from your body by touching something metal on any
device plugged into a grounded power source. If you walk around before finishing installation, discharge any
static electricity once again.
Installing Printer Memory
Additional printer memory is provided on a Dual In-line Memory Module (DIMM).
NOTE: Your multifunction printer supports only Dell DIMMs. Order Dell DIMMs online at
www.dell.com .
Power the multi-function printer off and unplug all cables from the multi-function printer. 1.
To remove the control board cover, pull out gently, as shown. 2.