Dell 1600n Multifunction Mono Laser Printer - Manual (Page 109)

"Distinctive Ring" is a telephone company service which enables a user to use a single telephone line to
answer several different telephone numbers. The particular number someone uses to call you on is identified
by different ringing patterns, which consist of various combinations of long and short ringing sounds.
Using the Distinctive Ring Pattern Detection feature, your fax machine can "learn" the ring pattern you
designate to be answered by the FAX machine. This ringing pattern will be recognized and answered as a
FAX call, and all other ringing patterns will be forwarded to the extension telephone or answering machine
plugged into the Phone connector (
) on back of your multi-function printer. You can easily suspend or
change Distinctive Ring Pattern Detection at any time.
Before using the Distinctive Ring Pattern Detection option, Distinctive Ring service must be installed on your
telephone line by the telephone company. To set up Distinctive Ring Pattern Detection, you will need another
telephone line at your location, or someone available to dial your FAX number from outside.
To set up the DRPD mode:
Press 1.
The first available menu item, "Receive Mode" displays on the bottom line.
Press the scroll button ( or ) until you see "DRPD Mode" on the bottom line and press .2.When "Set" displays on the bottom line, press . 2.
When "Set" displays on the bottom line, press 3.
The LCD displays "Waiting Ring"
Call your fax number from another telephone. It is not necessary to place the call from a fax machine. 4.
When your multi-function printer begins to ring, do not answer the call. The multi-function printer
requires several rings to learn the pattern. 5.
When the multi-function printer completes learning, the LCD displays "End DRPD Setup". 6.
If the DRPD setup fails, "DRPD Ring Error" appears. Press when "DRPD Mode" displays and
retry from step 3.To return to Standby mode, press .7.When the DRPD feature is set up, the DRPD option is available in the Receive Mode menu. To receive faxes
in the DRPD mode, you need to set the menu to DRPD; see page 118.NOTE: DRPD must be set up again if you re-assign your fax number, or connect the multi-functionprinter to another telephone line.NOTE: After DRPD has been set up, call your fax number again to verify that the multi-function printeranswers with a fax tone. Then have a call placed to a different number assigned to that same line to
be sure the call is forwarded to the extension telephone or answering machine plugged into the Phone
connector ( )on the back of the multi-function printer. Pages: 1 … 107 108 109 110 111 … 188 wrong Brand wrong Model non readable See also other documents in the category Dell Multifunction Devices: 2335DN (8 pages) 2335DN (284 pages) 2335DN (1 page) 1600n Multifunction Mono Laser Printer (134 pages) Sitemap
To return to Standby mode, press . 7.
When the DRPD feature is set up, the DRPD option is available in the Receive Mode menu. To receive faxes
in the DRPD mode, you need to set the menu to DRPD; see
page 118 .
NOTE: DRPD must be set up again if you re-assign your fax number, or connect the multi-function
printer to another telephone line.
NOTE: After DRPD has been set up, call your fax number again to verify that the multi-function printer
answers with a fax tone. Then have a call placed to a different number assigned to that same line to
be sure the call is forwarded to the extension telephone or answering machine plugged into the Phone
connector (
)on the back of the multi-function printer.